RB922UAGS-5HPacD

RB922UAGS-5HPacD
RouterBOARD RB922UAGS-5HPacD is a very versatile wireless router, perfect for assembling your own solution.
Our Price£70.00
Retail Price£99.00
CodeRB922UAGS-5HPacD
Stock33

It supports the new 802.11ac standard for high speed wireless (up to 866Mbit datarate and 20/40/80MHz channels). The device has ports and slots for many uses: 1x SFP cage, miniPCIe slot with SIM for 3G/4G modem or another wireless card, USB port, Gigabit Ethernet port and two MMCX connectors for the built in powerful 1300mW 802.11ac 2x2 radio. Comes with RouterOS L4 (AP) license.

Product specifications

Details
Product code RB922UAGS-5HPacD
CPU nominal frequency 720 MHz
SFP DDMI yes
CPU core count 1
Size of RAM 128 MB
10/100 Ethernet ports None
10/100/1000 Ethernet ports 1
MiniPCI slots 0
MiniPCI-e slots 1
Wireless chip model QCA9882-BR4A-R
Wireless standards 802.11a/n/ac
Number of USB ports 1
Power Jack 1
802.3af support no
Supported input voltage 8 V - 30 V
PoE out No
PoE in Yes
Voltage Monitor Yes
CPU temperature monitor No
PCB temperature monitor Yes
Dimensions 105x105mm
Operating System RouterOS
Operating temperature range -40°C .. +70°C tested
License level 4
Antenna gain DBI No
Current Monitor No
CPU QCA9557-AT4A-R
Max Power consumption 17W
SFP ports 1
SFP+ ports 0
USB slot type USB type A
Number of chains 2
Serial port None

Wireless specifications

5 GHz
TX RX
6MBit/s 31 -96
54MBit/s 27 -81
MCS0 30 -96
MCS7 27 -77
MCS9 22 -72

wireless parameters may be limited in software, depending on your local regulatory limitations

 

Performance test results

RB922UAGS-5HPacD QCA9550 1G all port test
Mode Configuration 1518 byte   512 byte   64 byte  
    kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 162.4 1,972.20 170.8 699.6 370.2 189.5
Bridging 25 bridge filter rules 162.4 1,972.20 111.8 457.9 99.9 51.1
Routing none (fast path) 162.4 1,972.20 317.4 1,300.10 370.2 189.5
Routing 25 simple queues 162.4 1,972.20 174.2 713.5 176.2 90.2
Routing 25 ip filter rules 60.2 731.1 62.8 257.2 61.8 31.6

 

  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
No recommended products at the moment.
No recommended products at the moment.