CCR1036-8G-2S+EM

CCR1036-8G-2S+EM
Our fastest router has now become even better - the new CCR1036-8G-2S+ now has two SFP+ ports for 10G interface support (SFP+ module available separately).
Our Price£905.00
Retail Price£1,295.00
CodeCCR1036-8G-2S+EM
Stock0

It uses the same 36 core Tilera CPU as our other CCR1036 model, and delivers the same performance, but now, ten gigabit links are possible. The device comes in a 1U rackmount case, has two SFP+ ports, eight Gigabit ethernet ports, a serial console cable and a USB port.

The CCR1036-8G-2S+ has two SODIMM slots, by default it is shipped with 4GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). Also available now, the EM model with 16GB of RAM!Supports both SFP (1.25G) and SFP+ (10G) modules

Product specifications

Details
Product code CCR1036-8G-2S+EM
SFP DDMI Yes
CPU nominal frequency 1.2 GHz
CPU core count 36
Architecture TILE
Size of RAM 16 GB
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 8
MiniPCI slots 0
MiniPCI-e slots 0
Number of USB ports 1
Memory Cards 1
Memory card type microSD
Power Jack 1
Supported input voltage 28 V - 18 V
PoE in No
PoE out No
Voltage Monitor Yes
CPU temperature monitor Yes
PCB temperature monitor Yes
Dimensions 355x145mm55mm
Operating System RouterOS
Operating temperature range -30C to +60C
License level 6
Antenna gain DBI No
Current Monitor Yes
CPU TLR4-03680CG-12CE-A3b
SFP ports 0
SFP+ ports 2
USB slot type microUSB type AB
Number of chains 0
Serial port RS232

Performance test results

CCR1036-8G-2S+EM

Tile 36 core max possible throughput test

Mode

Configuration

1518 byte

 

512 byte

 

64 byte

 

 

 

kpps

Mbps

kpps

Mbps

kpps

Mbps

Bridging

none (fast path)

2,274.00

27,615.50

6,579.00

26,947.60

39,764.60

20,359.50

Bridging

25 bridge filter rules

2,274.00

27,615.50

5,451.40

22,328.90

5,704.80

2,920.90

Routing

none (fast path)

2,274.00

27,615.50

6,579.00

26,947.60

34,086.10

17,452.10

Routing

25 simple queues

2,274.00

27,615.50

5,243.20

21,476.10

8,353.10

4,276.80

Routing

25 ip filter rules

1,956.70

23,762.20

3,392.90

13,897.30

3,481.80

1,782.70

  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
Please review these other products:

 
S-85DLC05D
S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM Our Price: £13.00
Retail Price: £14.56

click to see more

 
S-85DLC05D is a 1.25G SFP transceiver with a 850nm Dual LC connector, for up to 550 meter Multi Mode fiber connection, with DDM
Our Price: £13.00
Retail Price: £14.56

click to see more

 
S-31DLC20D
S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM Our Price: £17.00
Retail Price: £19.04

click to see more

 
S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM
Our Price: £17.00
Retail Price: £19.04

click to see more

 
S-3553LC20D
S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM. Our Price: £50.00
Retail Price: £56.00

click to see more

 
S-35/53LC20D is a pair of SFP transceivers, the S-35LC20D is a 1.25G Single Mode optical SFP module with a LC connector, T1310nm/R1550nm, which works for connections up to 20km and supports DDM.
Our Price: £50.00
Retail Price: £56.00

click to see more

 
SFP+ 1m direct attach cable
This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks. Our Price: £21.00
Retail Price: £23.52

click to see more

 
This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks.
Our Price: £21.00
Retail Price: £23.52

click to see more

 
SFP+ 3m direct attach cable
This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks. Our Price: £28.00
Retail Price: £31.36

click to see more

 
This is highly cost-effective way to connect two SFP/SFP+ devices (for example two units of CCR1036-8G-2S+) for very short distances, within racks and across adjacent racks.
Our Price: £28.00
Retail Price: £31.36

click to see more

No recommended products at the moment.